NetModule NetBox NB1310, Руководство пользователя

Страница: 16 / 110

User Manual NetBox Wireless Routers
2.4 NB2600
2.4.1 Operating Elements and Interfaces
The front panel has 10 status indicators. In addition there is an USB device port,
reset button at the front panel.
The following table describes the components on the front panel:
Panel Label Color State
Front USB - -
Front Reset - -
Front Power green on
off
Front Status green blinking slowly
on
blinking fast
off
Front Signal
Strength green on
off
running
Front Mobile
(UMTS /
GSM) green blinking slowly
on
off
Front WLAN green blinking slowly
on
off
Front VPN green on
off
Front GPS green on
off
Front SIM 1 - -
Front SIM 2 - -
Table 6: NB2600 components on the front panel
26-Apr-2012
Operating Elements and Interfaces
ndicators. In addition there is an USB device port, two SIM card slots and a
The following table describes the components on the front panel:
Function
USB device port for local administration.
Restart: press this button when the status LED is on
Factory reset: press and hold this button for at least 5 s
conds.
The device is powered
Power is missing
blinking slowly This indicates one of the following conditions: 1)
is starting up, 2) loading a new configuration
initiated by Web Manager
The device is ready
blinking fast Restart triggered by watchdog
The device does not start up
1 LED on: weak signal, 2 LEDs on: medium signal
3 LEDs on: strong signal, 4 LEDs on: very strong signal
No or insufficient signal
Software update
blinking slowly Mobile connection is being established
Mobile network connection is up
Mobile network connection is down
blinking slowly Mobile connection is being established
WLAN connection is up
WLAN connection is down
VPN connection is up
VPN connection is down
Service is enabled and valid GPS data is received and tran
mitted
No GPS data transmitted (not available or service disabled)
SIM socket 1
SIM socket 2
: NB2600 components on the front panel
16/110
two SIM card slots and a
Restart: press this button when the status LED is on
hold this button for at least 5 se-
ne of the following conditions: 1) the device
loading a new configuration, 3) factory reset
2 LEDs on: medium signal
4 LEDs on: very strong signal
enabled and valid GPS data is received and trans-
No GPS data transmitted (not available or service disabled)