www.netmodule.com
Configuration
The easiest way to configure the device is using the Web Manager.
1. Make sure that the Dynamic Host Configuration Protocol (DHCP) is enabled on your computer so that it can lease an IP
address from the router. Connect the Ethernet ports and wait a moment until your computer has received the paramete
(IP address, subnet mask, default gateway, DNS server).
2. Open a web browser such as Internet Explorer or Firefox. In the web
of the NetModule Wireless Router (i.e. http://192.168.1.1); the initial screen appears.
3. Follow the instructions and use the Web Manager to configure the device.
Further Help for
User manual:
The easiest way to configure the device is using the Web Manager. Please do the following steps:
1. Make sure that the Dynamic Host Configuration Protocol (DHCP) is enabled on your computer so that it can lease an IP
. Connect the Ethernet ports and wait a moment until your computer has received the paramete
(IP address, subnet mask, default gateway, DNS server).
2. Open a web browser such as Internet Explorer or Firefox. In the web browsers address field, enter the default IP address
(i.e. http://192.168.1.1); the initial screen appears.
Web Manager to configure the device.
Further Help for Configuration
ser manual:
http://www.netmodule.com/downloads
Quick Start Guide
the following steps:
1. Make sure that the Dynamic Host Configuration Protocol (DHCP) is enabled on your computer so that it can lease an IP
. Connect the Ethernet ports and wait a moment until your computer has received the parameters
address field, enter the default IP address
