NetModule NB1800, Руководство пользователя

Страница: 171 / 225

NBB-800
User Manual for NRSW version 4.5.0.100
Attention
In case you perform a major downgrade with a previous release line (e.g. 3.7.0 to 3.6.0),
please ensure to always use the latest release of that branch (i.e. 3.6.0.X) as only those
tend to be fully forward-compatible. Also keep in mind, that some hardware features may
not work (e.g. if not implemented in that version). In doubt, please consult our support
team.
A software image can be either uploaded via the Web Manager or retrieved from a specific URL. It
will be unpacked and deployed to a spare partition which gets activated if the update completed suc-
cessfully. The whole procedure is accompanied by all green LEDs flashing up, the subsequent system
reboot gets denoted by a slowly blinking Status LED. The backuped configuration will be applied at
bootup and the Status LED will blink faster during this operation. Depending on your configuration,
this may take a while.
Automatic Software Update
This menu can be used to run a automatic software update of the system.
Parameter Automatic software update
Status Enable/disable automatic software update
Time of day Every day at this time the router will do a check for updates
Operation Download latest image from the the server or specify the URL where
the software update package should be downloaded from. Supported
protocols are TFTP, HTTP, HTTPS, and FTP. Provide a URL like
protocol://server/path/file
Remark: SSL certificates of HTTPS URLs will be only verified if a list of CA root certificates are
provided under
5.8.8 .
After the new software has been installed, the latest running configuration will be applied afterwards
during bootup. This is indicated by a faster green blinking of the Status LED.
5.8.4. Module Firmware Update
This menu can be used to perform a firmware update of a specific module.
Parameter Module Firmware Update
Update operation The update operation method being used. You can either upload a
firmware package or download it from a specifc URL.
Module The module which shall be updated.
Storage The temporary storage which shall be used for the update procedure.
For boxes with limited amount of flash it is possible to use an USB
stick which must be properly set up in the USB section and hold a
proper filesystem such as ext4.
171