Netis WF-2405, Руководство пользователя

Страница: 57 / 59

WF-2405
User Manual
56
5.7.
System Tools
Please refer to chapter 3.13 .
5.8.
About
Please refer to chapter 3.14 .
Note:
After finishing configure WF-2405, please return to your computer to change the IP
address. You can use static IP or obtain an IP automatically.
Figure 5-7
6.
Troubleshooting
6.1. I cannot access the Web-based Configuration Utility from the Ethernet
computer used to configure the router.

Check that the LAN LED is on. If the LED is not on, verify that the cable for the LAN
connection is firmly connected.

Check whether the computer resides on the same subnet with the router
‟
s LAN IP address.

If the computer acts as a DHCP client, check whether the computer has been assigned an
IP address from the DHCP server. If not, you will need to renew the IP address.

Use the ping command to ping the router
‟
s LAN IP address to verify the connection.

Make sure your browser is not configured to use a proxy server.

Check that the IP address you entered is correct. If the router
‟
s LAN IP address has been
changed, you should enter the reassigned IP address instead.