XAV1004 Powerline AV Ethernet Adapter User Guide
Installation and Basic Configuration
1-3
v1.1, September 2009
XAV1004 Front View
The front view of the XAV1004 is shown in the following illustration:
The following table describes the status lights (LEDs) on the front of the XAV1004.
Figure 1-2
Table 1-1.
XAV1004
LEDs
Item
Description
Ethernet LED
•
Solid green
. The Ethernet port is linked, but there is no activity.
•
Blinking green
. There is traffic between an Ethernet port and the Powerline
network.
•
Off
. There is no Ethernet connection.
Powerline LED
•
Solid
. The adapter is connected to a Powerline network.
•
Fast blinking
. The adapter is sending or receiving data.
•
Off
. The adapter has not found any other compatible Powerline devices using the
same Powerline network encryption key.
The
Pick A Plug
feature shows by the color of the LED the speed of the Powerline
link for the electrical outlet where the device is connected:
•
Green
. The link rate is faster than 80 Mbps.
•
Amber
. The link rate is between 50 Mbps and 80 Mbps.
•
Red
. The link rate is slower than 50 Mbps.
If the LED is not green, try another outlet. You may get a better link rate, and the LED
will turn green.
Power LED
•
Solid green
. The electrical power is on.
•
Fast blinking
. The adapter is setting itself up after the reset or Security button was
pressed.
•
Slow blinking
. The adapter goes into power saving mode if no Ethernet device is
connected.
•
Off
. There is no electrical power.
Ethernet
LED
Powerline
LED
Power
LED
(“Pick A Plug”)
