Netgear WNR612 Wireless Router User Manual
94
destination IP address, subnet mask, and gateway to specify a routing rule. The
destination IP address and subnet mask are used to determine a destination
network or host. Then, the router sends packets to the specified destination
network or host through the gateway.
Click
Static Routes
on the left pane of the page to display the following page.
In this page, you can add, edit, and delete a static routing rule, and view the current
static routing table in the router.
Click
Add
and the following page appears:
The following table describes parameters of adding a routing rule:
Field
Description
Router Name
Enter the name of the static route.
Active
Enable it to apply the routing rule.
Destination IP
Address
Indicate the destination address or network that you want to
access.
