40
|
Chapter 2: Safeguarding Your Network
N150 Wireless Router User Manual
Tip:
Before saving your configuration file, change the administrator password
to the default,
password
. Then change it again after you have saved the
configuration file. If you save the file with a new password, and then you
later forget the new password, you will have to reset the router back to
the factory defaults and log in using the default password of
password
.
This means you will have to re-enter all the router configuration settings.
Understanding Your Firewall
Your N150 Wireless Router contains a true firewall to protect your network from attacks and
intrusions. A firewall is a device that protects one network from another while allowing
communication between the two. Using a process called Stateful Packet Inspection, the
firewall analyzes all inbound and outbound traffic to determine whether or not it will be
allowed to pass through.
By default, the firewall allows any outbound traffic and prohibits any inbound traffic except for
responses to your outbound traffic. However, you can modify the firewall’s rules to achieve
the following behavior:
•
Blocking sites
. Block access from your network to certain Web locations based on Web
addresses and Web address keywords. This feature is described in
Blocking Access to
Internet Sites
on page
41.
•
Blocking services
. Block the use of certain Internet services by specific computers on
your network. This feature is described in
Blocking Access to Internet Services
on
page
42.
•
Scheduled blocking
. Block sites and services according to a daily schedule. This feature
is described in
Scheduling Blocking
on page
44.
•
Allow inbound access to your server
. To allow inbound access to resources on your
local network (for example, a Web server or remote desktop program), you can open the
needed services by configuring port forwarding as described in
Allowing Inbound
Connections to Your Network
on page
57.
•
Allow certain games and applications to function correctly
. Some games and
applications need to allow additional inbound traffic in order to function. Port triggering
can dynamically allow additional service connections, as described in
Configuring Port
Triggering
on page
64. Another feature to solve application conflicts with the firewall is
Universal Plug and Play (UPnP), described in
Using Universal Plug and Play
on page
66.