NETGEAR WGT624 - 108 Mbps Wireless Firewall Router, Справочное руководство

Страница: 15 / 96

108 Mbps Wireless Router WGT624 v4 Reference Manual
Connecting the Router to the Internet 1-3
v1.0, May 2007
Port Connections on the Back
The back of the wireless router has the following port connections:
1. Power adapter port
2. Four local Ethernet (LAN) ports for connecting the local computers
3. Internet port for connecting to a cable or ADSL modem
4. Factory default reset button
5. Wireless antenna
3. Wireless
On
Blink
Off Indicates that the Wireless radio is enabled.
Data is being transferred.
The wireless router radio is off. (See
“Advanced Wireless Settings”
in Chapter 2 .)
4. Internet
On (Amber)
On (Green)
Blink (Green)
Off
The Ethernet cable is connected, but the wireless router has not
received an Internet address.
The wireless router has an Internet address.
Data is being communicated with the Internet.
No link is detected on this port.
5. LAN (Local Area
Network) Lights
1–4
On (Green)
Blink (Green)
On (Amber)
Blink (Amber)
Off The local port is connected to a 100 Mbps device.
Data is being transmitted at 100 Mbps.
The local port has detected a link with a 10 Mbps device.
Data is being transmitted at 10 Mbps.
No link is detected on this port.
Figure 1-2
Table 1-1. Status Lights (continued)
1
2
3
5
4