NETGEAR WG602 V3, Руководство пользователя

Страница: 47 / 120

User’s Guide for the WG602 v3 54 Mbps Wireless Access Point
Management 4-5
202-10060-01, September 2004
Rebooting and Resetting Factory Default Options
The Reboot option restarts the access point. From the Management section of the main menu,
select Reboot AP. Select
Yes , then click Apply to reboot the access point.
Restoring the WG602 v3 to the Factory Default Settings
It is sometimes desirable to restore the wireless access point to the factory default settings. This
can be done by using the Restore Factory Default function, which restores all factory settings.
After a restore, the password will be password , the DHCP client is enabled, the WG602 v3
defaults to the LAN IP address of 192.168.0.227 when there is no DHCP server, and the NetBIOS
name is reset to NETGEAR plus the last 6 digits of the MAC address printed on the label on the
bottom of the unit, for example
NETGEAR123456 .
On the Restore Factory Default Settings screen, select Yes , then click Apply to restore the factory
default settings.
Using the Reset Button to Reboot or Restore Factory Defaults
To restore the factory default configuration settings without knowing the login password or IP
address, you must use the Default Reset button on the rear panel of the wireless access point (see
“WG602 v3 Wireless Access Point Rear Panel” on page 2-6 ). The reset button has two functions:
• Reboot. When pressed and released quickly, the wireless access point will reboot (restart).
• Reset to Factory Defaults. This button can also be used to clear all data and restore all
settings to the factory default values, when held down longer.
To clear all data and restore the factory default values:
1.
Use something with a small point, such as a pen, to press the Reset button in for at least 10
seconds.
2.
Release the Reset button.
The factory default configuration has now been restored, and the WG602 v3 is ready for use.