NETGEAR WAG311 - Dual Band Wireless PCI Adapter, Руководство по установке

Страница: 24 / 79

Installation Guide for the NETGEAR Dual Band Wireless PCI Adapter WAG311
2-6 Basic Setup
Configure your WAG311.
a.
Right-click on the network icon in the
Windows XP system tray to open the
network options menu.
Note : The instructions here explain how
to use the Windows XP wireless
configuration utilities. You may prefer to
use the Netgear Smart Wireless
Configuration utility. To do so, click the
Advanced tab, uncheck the “Use
Windows to configure my wireless
network settings” checkbox, and follow
the configuration procedures in the
online help for the Netgear Smart
Wireless Configuration utility or see
Chapter 3, “Configuration” for complete
instructions.
b.
Click on the View Available Wireless
Networks menu item.
c.
If there is more than one wireless
network in your vicinity, select the one
to which you will connect.
d.
Click on the “Allow me to connect to the
selected wireless network even though
this is not secure” check box.
e.
Click Connect.
Windows XP Network Connection Alert
Note: This procedure assumes your wireless network
is not using WEP security. If your wireless network
uses WEP, set up your WAG311 accordingly. To view
WEP settings help, click the Advanced button and
click the “Learn about...” link on the Windows XP Local
Area Connection Wireless Networks Properties tab
page.
Right-click here to display this menu.