9
Problem
Cause
Possible Solution
You cannot
configure
the access
point from a
browser.
Multiple
causes.
•
Make sure that the access point is correctly
installed, it is powered on, and the LAN LED is
lit.
•
Make sure that your computer is using an
IP address in the same range as the access
point. The access point default IP address is
192.168.0.100, and the default subnet mask is
255.255.255.0.
•
Quit the browser, clear the cache, delete the
cookies, and launch the browser again.
You cannot
access the
Internet or
the LAN from
a wireless
device.
A
configuration
problem
exists.
•
Make sure that the SSID and wireless security
settings of the wireless device are the same as
those of the access point.
•
The wireless device might not have the correct
TCP/IP settings to communicate with the
network. Restart the wireless device and check
that TCP/IP is set up correctly for that network.
•
The access point default values might not work
with your network. Check the access point
default configuration against the configuration
of other devices in your network. For
information about changing the default values
of the access point, see the reference manual.
