manualshive.com logo in svg

NETGEAR VEVG2660-1TKSAS, Руководство пользователя

Поделиться
Скачать
NETGEAR VEVG2660-1TKSAS Скачать руководство пользователя страница 85

Manage Your Network 

85

 VDSL Voice Gateway

•

Connection Status

. The status of the connection: Connected, Disconnected, 

Negotiation (---, Success), or Authentication (---, Success). --- indicates failure.

•

Negotiation

. 

•

Authentication

.

•

IP Address

. The IP address that is assigned to the gateway.

•

Subnet Mask

. The subnet mask that is assigned to the gateway.

Update the Firmware

The gateway firmware (routing software) is stored in flash memory. You might see a 
message at the top of the genie screens when new firmware is available. You can respond to 
that message to update the firmware, or you can check to see if new firmware is available, 
and to update your product. 

To manually update your gateway with firmware that you downloaded:

1. 

Launch a web browser from a computer or wireless device that is connected to the 
network.

2. 

Type 

http://routerlogin.net 

or 

http://10.0.0.2

.

A login screen displays.

3. 

Enter the gateway user name and password.

The user name is 

admin

. The default password is 

admin

. The user name and password 

are case-sensitive.

The BASIC Home screen displays.

4. 

Select 

ADVANCED > Administration > Router Update

. 

5. 

Click 

Browse

, navigate to the firmware file (the file ends in 

.img

), and select the firmware 

file.

6. 

Click the 

Upload

 button.

WARNING:

To avoid the risk of corrupting the firmware, do not interrupt the 
upgrade. For example, do not close the browser, click a link, or load 
a new page. Do not turn off the gateway.

A progress bar shows the progress of the firmware upload process.

When the upload is complete, your gateway restarts. The upload process can take up to 
three minutes and the upgrade process typically takes about one minute. To determine 
whether you need to reconfigure the gateway after upgrading, read the new firmware 
release notes.

Содержание VEVG2660-1TKSAS





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды