manualshive.com logo in svg

NETGEAR VEVG2660-1TKSAS, Руководство пользователя

Поделиться
Скачать
NETGEAR VEVG2660-1TKSAS Скачать руководство пользователя страница 101

VPN Lite 

101

 VDSL Voice Gateway

The VPN lite Configuration screen displays:

6. 

Enter the information for one of the sites that you configured on the Telkom VPN Lite web 
portal and the click 

Next 

button

Note:

.The ampersand (&) character is not supported.

For the site that you are adding to your network, complete the following fields:

•

Username

. Enter the user name that you configured.

•

Password

. Enter the password that you configured.

•

LAN IP/netmask

. Enter the private and static IP address that you configured.

Note:

The IP address for each site configured must be different and fall within 
a different IP subnet range. For example, [email protected] can be 
10.0.1.0/24. Then the IP subnet for [email protected] must be a 
different subnet, like 10.0.2.0/24. The IP address must correspond 
exactly to the one configured on the VPN Lite web page.

7. 

Review the configuration details and click the 

Finish

 button.

Your settings are saved.

Note:

After clicking the 

Finish

 button, you might need to connect to your 

gateway with the new LAN IP address entered when you configured 
VPN Lite. Wait until the progress bar on the screen has completed 
before attempting to reconnect.

8. 

Repeat this process for every VPN Lite site that you want to add to your network.

Содержание VEVG2660-1TKSAS





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды