Wireless Point-to-Point Configuration
Access Point 1
Access Point 2
•
In each Access Point, in the Wireless
Bridge Page, enable
Wireless
Bridinging and Repeating
and select
the option for
Wireless Point-to-
Point Bridge
•
Make note of the following:
MAC Adress of Access Point 1:
MAC Adress of Access Point 2:
Click on the Edit button at the bottom of the screen to change the details of the profile you have
enabled:
Access Point 1
•
Enter the MAC Adress of Access
Point 2 (
➋
)
in the
Remote MAC
Address
field.
•
Enter your
Network Authentication
details. Make sure the settings you
use here are set identically in both
Access Points.
Access Point 2
•
Enter the MAC Adress of Access
Point 1 (
❶
)
in the
Remote MAC
Address
field.
•
Enter your
Network Authentication
details. Make sure the settings you
use here are set identically in both
Access Points.
❶
➋
➋
❶
➋
❶
