NETGEAR ProSafe Quad WAN FR538G, Справочное руководство

Страница: 57 / 194

ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
LAN Configuration 3-7
v1.0, November 2007
Port Management
Port Management allows you to manage specific features for each LAN port:
• The QoS priority for each port (either high or normal).
• Set the Mbps speed for each LAN port and whether it is to operate at full-duplex or half-
duplex. If the LAN port speed is disabled (the default), then auto-negotiation is selected by
default.
• Select one of four VLAN groups for each LAN port. Stations on the same VLAN group can
communicate with each other. Broadcast and multicast frames are constrained by VLAN
boundaries, so only stations whose ports are members of the same VLAN can see those
frames.
To enable Port Management:
1. Select Network Configuration > LAN Setup from the main menu, and then click the Port
Management tab. The Port Management screen will display.
2. Select the checkbox for each port to be enabled. It is s per-port setting.
3. Check the Normal or High radio box for each port to specify port-based QoS.
4. Check the Enable radio box and select the speed and duplex from the pull-down menus for
each port (the per-port speed is 10Mbps, 100Mbps or 1000 Mbps; and the per-port duplex is
half-duplex or full-duplex).
5. Select the VLAN ID from each LAN pull-down menu. (Four VLANs are supported; only
stations on the same VLAN group can communicate with each other.)
6. Click Apply to save your settings.
Figure 3-3