NETGEAR ProSafe GSM7324, Справочное руководство, Страница: 47 / 263

7000 Series L3 Managed Switch Reference Manual for Software v1.0
Quick Startup 6-3
May 30, 2003 Beta Draft
Quick Start up Physical Port Data
Table 6-2.
Quick Start up Physical Port Data
Quick Start up User Account Management
Command Details
show port all
Displays the Ports
Slot.Port
Slot Options
0 - The slots on the front of the switch (10/100 ports)
Port Options
Ports 1-24 are copper ports
Ports 21-24 fiber ports
Type - Indicates if the port is a special type of port
STP State - Displays the Spanning Tree status
Admin Mode - Selects the Port Control Administration State
Physical Mode - Selects the desired port speed and duplex mode
Physical Status - Indicates the port speed and duplex mode
Link Status - Indicates whether the link is up or down
Link Trap - Determines whether or not to send a trap when link status changes
LACP Mode - Displays whether LACP is enabled or disabled on this port.
Table 6-3. Quick Start up User Account Management
Command Details
show users Displays all of the users that are allowed to access the switch
Access Mode - Shows whether the user is able to change
parameters on the switch (Read/Write) or is only able to view then
(Read Only).
As a factory default, admin has Read/Write access and guest has
Read Only access. There can only be one Read/Write user and up
to 5 Read Only users.
show loginsession
Displays all of the login session information