16
2. If you used a private encryption key, press the
Security
button on
one of the adapters already a part of the network for two seconds,
then press the
Security
button on the new adapter for two seconds.
Both buttons must be pressed within two minutes.
3. Secure the Powerline network:
a. On any of the adapters, press and hold the
Security
button
for two seconds.
b. On any one of the other adapters, press and hold the
Security
button for two seconds.
Both buttons must be pressed within two minutes.
Note:
The
Security
button does not work in power saving mode
Do not press the
Security
button on the Powerline adapter until
installation is complete and the adapters are communicating with each
other (indicated by the blinking Power LED). Pressing this button too
soon can temporarily disable Powerline communication. If this occurs, use
the
Factory Reset
button to return the Powerline adapter to its factory
default settings.
4. Wait for the Powerline network to recognize each Powerline device.
This process could take as little as 5 seconds or up to 80 seconds.
Содержание PowerLEAP WiFi 1000
Страница 1: ...Quick Start PowerLEAP WiFi 1000 Quick Start Guide...
Страница 2: ...2 Package Contents In some regions a resource CD is included with your product...
Страница 7: ...7 Install Your Adapters Room 1 Room 2...
Страница 10: ...10 3 Launch NETGEAR genie on your computer and click Network Map or select it from the menu...
