You have successfully added a new PLW1000 to a secured powerline network
How to enable wireless card access list on PLW1000 V2?
Wireless card access list restricts access to the wireless network to only allow specific MAC
address. It means you have to enter your WiFi clients MAC address before it could connect to
your PLW1000’s wireless network. This article provides steps on how to enable wireless card
access list on your PLW1000.
To enable wireless card access list on PLW1000:
1.
Use a computer or a WiFi device that is connected to your PLW1000.
2.
Open your preferred browser (i.e. Safari, Internet Explorer, Mozilla Firefox, Google Chrome etc).
3.
Type http://www.mywifiext.net in the web browser address bar.
4.
When prompted to log in, enter admin for username and password for password.
NETGEAR Genie displays.
