6. Power LED. The Power LED lights when power is supplied to the router. For more
information, see Orbi router Power LED behavior on page 9.
7. Reset button. Pressing the Reset button resets the router. If the Reset button is
pressed for at least 10 seconds and the Power LED blinks, the router returns to its
factory settings.
Orbi router front LED behavior
The router LED is located on the front of the Orbi router. Use this LED to determine the
router status.
The following table describes the router LED behavior.
Table 1. Router LED behavior
Description
LED color
The router is booting or someone pressed the Sync button.
Pulsing white
The router is resetting to its factory default settings.
Solid white
The router cannot connect to the Internet.
Solid magenta
The router finished booting and is working normally.
Off
Orbi router Power LED behavior
A Power LED is located on the back of the Orbi router.
The following table describes the router’s Power LED behavior.
Table 2. Router Power LED behavior
Description
LED color
Power is on.
Solid green
The router is resetting to its factory default settings.
Blinking amber
The router’s firmware is corrupted.
Blinking red
Power is not supplied to the router.
Off
User Manual
9
Overview
Orbi WiFi 6 Dual-band Mesh System