NETGEAR ND508 - Network Drive - 8 GB, Руководство по установке

Страница: 7 / 18

Model ND508/ND520 Network Disk Drive Installation Guide
To connect the power cord to the Model ND508/ND520 Network Disk Drive:
1. Connect one end of the power cord to the power receptacle on the rear
panel of the Model ND508/ND520 Network Disk Drive, as shown below.
2. Connect the other end of the power cord to a standard power outlet.
3. Power on the network disk drive by pressing the power button on the
rear panel.
4. Verify that the LEDs on the front panel display the following:
• The Power LED is green, indicating that power to the network disk
drive is on.
• The Link and Ready LEDs are green, indicating that the network disk
drive is connected to the network and ready for use.
5. Verify that the Link LED is on. If this LED is not on, depress the
Normal/Uplink button on the front panel of the drive.
Caution: Use the appropriate power cord as required by your national
electrical codes and ordinances.
Connect the Power Cord
Rear Panel of the Model ND508/ND520
Network Disk Drive
9282FA
Fan Power
button
Power receptacle