NETGEAR MS70 Скачать руководство пользователя страница 10

Страница: 10 / 150

Router LED behavior

The following table describes the LED behavior for the LED that is on the front of the
router.

Table 1. Router LED behavior

Description

LED color

The router LED pulses white for one of the following reasons:
• You connected the power adapter to the router. Now the router is booting and

attempting to sync with the satellite.

• You pressed the Sync button and the router is attempting to sync with the satellite.

• You pressed the Reset button and the router is resetting to its factory default settings.

Pulsing white

The router finished booting, is connected to the Internet, and is working normally. This
color stays on all the time if the router is working normally.

Solid blue

The router is unable to connect to the Internet.

Solid amber

The router's firmware is corrupted.

Pulsing amber

User Manual

Overview

Nighthawk Mesh WiFi 6 System with MR70 router and MS70 satellite

Содержание MS70























































































































































Результаты поиска

Содержание MS70

Отзывы:

Похожие инструкции для MS70

Бренды по названию

Популярные бренды

NETGEAR MS70, Руководство пользователя

Результаты поиска

Содержание MS70

Отзывы:

Похожие инструкции для MS70

Бренды по названию

Популярные бренды