Administration
57
Mobile LTE Broadband 11n Wireless Router MBR1516
•
Mobile Broadband Modem
. This shows the properties of the mobile broadband
modem.
-
Modem Identity
. Shows the modem in use.
-
Modem SW version
. The software version of the modem.
-
Modem driver version
. The driver version of the modem.
-
IMEI
. International Mobile Equipment Identity. The unique identity of the modem.
-
Operator
. The ISP for the broadband wireless network.
-
Network mode
. The mode of the current network the modem is connected to.
This is dependent on coverage and distance from the cell site.
•
Wireless Broadband Port
. The current settings of mobile broadband port.
-
Connection Status
. This shows the status of the wireless broadband connection.
-
IP Address
. The IP address being used by the Internet (WAN) port of the router.
If no address is shown or the address is 0.0.0, the router cannot connect to the
Internet.
-
Protocol
. This shows if the router is using a fixed IP address on the WAN. If the
value is DHCP Client, the router obtains an IP address dynamically from the ISP.
-
IP Subnet Mask
. The IP subnet mask being used by the Internet (WAN) port of
the router.
-
Domain Name Server
. The Domain Name Server addresses being used by the
router. A Domain Name Server translates human-language URLs such as
www.netgear.com into IP addresses.
•
LAN Port
. These are the current settings, as set in the LAN Setup screen.
-
MAC Address
. The Media Access Control address. This is the unique physical
address being used by the Ethernet (LAN) port of the router.
-
IP Address
. The IP address being used by the Ethernet (LAN) port of the router.
The default is 192.168.0.1.
-
DHCP
. Identifies whether the router’s built-in DHCP server is active for the
LAN-attached devices.
-
IP Subnet Mask
. The subnet mask associated with the LAN IP address.
•
Wireless Port
. These are the current settings, as set in the Wireless Settings screen.
-
Name (SSID)
. The SSID of the router.
-
Region
. The location (country).
-
Channel
. The current channel in use.
-
Wireless AP
. Indicates if the access point feature of the router is enabled or not.
If not enabled, the WiFi LED on the front panel is off.
-
Broadcast Name
. Indicates if the router is broadcasting its SSID.