NETGEAR genie BASIC Settings
24
Mobile LTE Broadband 11n Wireless Router MBR1516
Wireless Settings
The Wireless Settings screen lets you view or configure the wireless network setup.
The Mobile LTE Broadband 11n Wireless Router comes with preset security. This means that
the WiFi network name (SSID), network key (password), and security option (encryption
protocol) are preset in the factory. You can find the preset SSID and password on the bottom
of the unit.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
¾
To view or change basic wireless settings:
NETGEAR recommends that you do not change your preset security settings
.
If you do
decide to change your preset security settings, make a note of the new settings and store it in
a safe place where you can easily find it.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the router.
1.
On the BASIC Home screen, select
Wireless
to display the Wireless Settings screen.
The screen sections, settings, and procedures are explained in the following sections.
2.
Make any changes that are needed, and click
Apply
to save your settings.
3.
Set up and test your wireless devices and computers to make sure that they can connect
wirelessly. If they do not, check the following:
