NETGEAR GSM7248v2 - ProSafe 48 Port Layer 2 Gigabit L2 Ethernet Switch, Инструкция к добавке

Страница: 1 / 17

FSM73xx GSM73xx GMS72xxR
– Shared access to the Internet across
Multiple routing VLANs using a Prosafe Firewall
This document describes how to:
- Create multiple routing VLANs
- Obtain Internet access on multiple VLANs using one Internet gateway
The procedure described can apply to most Layer 2 and Layer 3 Switches and VPN Firewall with new
Web Interface (defined as the one with the Menus appearing horizontally on top).
Hardware differences among different models must be taken in consideration.
NOTE:
This document is not intended to illustrate how to perform full Layer3 separation, for which Access
Control Lists (ACLs) should be used.
Table of Contents
VLAN-Definition
................................................................................................................ 2
Notes when setting-up VLANs ....................................................................................... 2
1 - Physical Setup
............................................................................................................ 3
2 - Logical Setup .............................................................................................................. 3
3 - Configuring the Switch management IP address
.................................................. 4
4 - Creating a routing VLAN ........................................................................................... 6
5 -
Remove ports’ VLAN membership
.......................................................................... 8
6 - Enable DHCP and create a DHCP pool per VLAN ............................................. 10
8
– Configuring the switch default route
..................................................................... 14
9
– Configuring static routes on the Internet Default Gateway
............................... 16
10
– Saving the configuration
....................................................................................... 17