NETGEAR GA620 - PCI Fiber Card, Справочное руководство

Страница: 42 / 48

Reference Guide for the Model GA620 Gigabit Ethernet Card
5-2 Troubleshooting
• The optional -l parameter defines a file in which to log the test results.
A text copy of the DDTP test results are placed in the specified file.
For example, to test the second card in a system and store the test results in log.txt in the
current directory, you could enter the following command:
>dos4gw e:\diag\ddtp -c 1 -l log.txt
• The optional -e parameter activates the external loopback test. Both the internal and
external loopback example tests show 1000 packets sucessfully received with 0 errors
detected, indicating that the card is functioning properly.
The test result from the previous example could look like this:
Log file created by Development and Diagnostic Test Program v1.02
on: Thu Aug 20 15:28:34 1998
---------------------------------------------
Development and Diagnostic Test Program (ddtp) v1.02
PCI bios found. v0.16.
HW Mech #1 supported
Number of PCI buses: 1
GA620 #0 found in PCI bus 0.
GA620 #1 found in PCI bus 0.
2 GA620 card(s) detected
Current card set to bus 0 GA620 #1.
internal Loopback Test
pkts:0 secs:0pkts:48 secs:1pkts:144 secs:2pkts:240 secs:3pkts:320 secs:4pkts:416
secs:5pkts:512 secs:6pkts:592 secs:7pkts:688 secs:8pkts:784 secs:9pkts:864
secs:10pkts:960 secs:11 1000 packets transmitted sucessfully
1000 packets received sucessfully
0 errors detected
external Loopback Test
pkts:0 secs:0pkts:96 secs:1pkts:192 secs:2pkts:288 secs:3pkts:368 secs:4pkts:464
secs:5pkts:544 secs:6pkts:640 secs:7pkts:736 secs:8pkts:816 secs:9pkts:912 secs:10 1000
packets transmitted sucessfully
1000 packets received sucessfully
0 errors detected
>
The internal loopback test is executed automatically.
Note: The external loopback test requires a loopback cable connecting the RX port to the
TX port on the network card. If a loopback cable is not used, the external loopback test
fails
.