NETGEAR GA620 - PCI Fiber Card, Справочное руководство

Страница: 39 / 48

Reference Guide for the Model GA620 Gigabit Ethernet Card
Novell NetWare Driver Software 4-11
The buffer values are set in the startup.ncf file. In the sample listing below, the boldface lines
have been changed to support one card:
; The following lines were moved or added by the NetWare Support Pack
LOAD D:\NWSERVER\PK411.NLM
; End of modifications made by NetWare Support Pack installation
LOAD AIC7870.DSK SLOT=2
set maximum packet receive buffers = 3012
set minimum packet receive buffers = 1512
set maximum physical receive packet size = 1530
set cpu hog timeout amount = 0
20.
Restart the Novell NetWare server.
You enter a different command depending on the prompt:
• If you are at the DOS prompt, enter this command:
C:\nwserver> server
• If you are at the NetWare prompt, enter these commands:
server_name: down
server_name: restart serve
r
Changing Configuration Parameters
If you want to make changes after the driver software is installed, changes to the card configuration
are usually made with the Novell inetcfg program. This program can be accessed from your
NetWare server prompt by entering the following command:
server_name: load inetcfg
For more details about using inetcfg, see the Utilities Reference in your Novell NetWare 4.11
online documentation.
See Table 4-2 on page 4-9 for a list of configurable parameters.
Novel.fm Page 11 Monday, November 23, 1998 1:04 PM