NETGEAR FWG114P - ProSafe 802.11g Wireless Firewall, Справочное руководство

Страница: 25 / 70

Reference Manual for the ProSafe Wireless 802.11g Firewall/Print Server Model FWG114P
Introduction 2-7
March 2004, 202-10027-01
The FWG114P Front Panel
The front panel of the FWG114P contains the status LEDs. Use the LEDs to verify various
operations. Viewed from left to right,
Table 2-1 describes the LEDs on the front of the router.
Figure 2-1: FWG114P Front Panel
Table 2-1. LED Descriptions
Label Activity Description
POWER On Power is supplied to the firewall.
TEST On
Off The system is initializing.
The system is ready and running.
PRINTER
ACT On
Blinking The printer is connected and powered on.
Data is being transmitted or received by the Printer port.
ALERT On (Amber) The printer has a problem, such as out of paper, out of ink, or a
paper jam.
MODEM
ACT Blinking Data is being transmitted or received by the Modem port.
LINK On (Amber) The port has detected a link with an attached device.
INTERNET Note: The operation of these LEDs depends on how the WAN port is configured.
100 (100 Mbps) On
Off The Internet (WAN) port is operating at 100 Mbps.
The Internet (WAN) port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LOCAL
100 (100 Mbps) On
Off The Local port is operating at 100 Mbps.
The Local port is operating at 10 Mbps.
LINK/ACT
(Link/Activity)
On
Blinking The Local port has detected a link with an attached device.
The Local port is transmitting or receiving data.
WLAN On
Blinking
The Wireless (WLAN) port is operating.
The Wireless (WLAN) port is transmitting or receiving data.
ProSafe 802.11g Wireless Firewall/Print Server
Broadband
MODEL FWG114P
PWR
P R I N TER M O D EM I N TER N ET LO CA L W LA N
TEST
ACT
ALERT
ACT
LINK
100
1 2 3 4
LNK/ACT
100
LNK/ACT