NETGEAR FVL328 - Cable/DSL ProSafe VPN Firewall Router, Справочное руководство

Страница: 215 / 240

Reference Manual for the NETGEAR ProSafe VPN Client
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router H-15
202-10015-01
Once the connection is established, you can access resources of the network connected to the
FVL328.
Another method is to ping from the remote PC to the LAN IP address of the FVL328. To perform
a ping test using our example, start from the remote PC:
1.
Establish an Internet connection from the PC.
2.
On the Windows taskbar, click the Start button, and then click Run.
3.
Type
ping -t 192.168.0.1
and click OK.
This will cause a continuous ping to be sent to the first FVL328. After a period of up to two
minutes, the ping response should change from “timed out” to “reply.”
To test the connection to a computer connected to the FVL328, simply ping the IP address of
that computer.
Once connected, you can open a browser on the remote PC and enter the LAN IP Address of the
FVL328, which is http://192.168.0.1 in this example. After a short wait, you should see the login
screen of the FVL328.
From the FVL328 to the Client PC
You can use the FVL328 Diagnostic utilities to test the VPN connection from the FVL328 to the
client PC. Run ping tests from the Diagnostics link of the FVL328 main menu.
Monitoring the PC VPN Connection
Information on the progress and status of the VPN client connection can be viewed by opening the
NETGEAR VPN Client Connection Monitor or Log Viewer. To launch these functions, click on
the Windows Start button, then select Programs, then NETGEAR ProSafe VPN Client, then either
the Connection Monitor or Log Viewer.