NETGEAR FS728TP - ProSafe 24 Port 10/100 Smart Switch, Руководство по администрированию программного обеспечения

Страница: 142 / 261

142 | Chapter 5: Managing Device Security
FS728TP Smart Switch Software Administration Manual
Management Security Settings
From the
Management Security Settings
page, you can configure the login password,
Remote Authorization Dial-In User Service (RADIUS) settings, Terminal Access Controller
Access Control System () settings, and authentication lists.
To display the page, click the
Security

Management Security
tab. The Management
Security folder contains links to the following features:
• Change Password
on page 142
• RADIUS Configuration
on page 143
• Configuring
on page 148
• Authentication List Configuration
on page 151
Change Password
Use the page to change the login password. To display the page, click
Security

Management Security

User Configuration

Change Password
.
To change the login password for the management interface:
1.
Specify the current password in the Old Password. The entered password will be
displayed in asterisks (*). Passwords are 1–20 alphanumeric characters in length and
are case sensitive.
2.
Enter the new password. It will not display as it is typed, and only asterisks (*) will show on
the screen. Passwords are 1–20 alphanumeric characters in length and are case sensitive.
3.
To confirm the password, enter it again to make sure you entered it correctly. This field will
not display, but will show asterisks (*)
4.
Use the Reset Password field to reset the password to the default value.
5.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.