Model FS308 Fast Ethernet Switch Installation Guide
Before connecting the switch, be sure you review “Applications” for information
about determining the appropriate configuration for your networking needs.
To connect the switch:
1. Connect the devices to the 10/100 Mbps ports on the switch, using
Category 5 UTP cable and an RJ-45 plug.
2. Set the Normal/Uplink push button.
3. Set the FDX/AUTO toggle switches on the rear panel for the selected
duplex mode (the default setting is AUTO).
4. Connect one end of the DC power adapter cable to the power outlet on
the rear panel of the switch and the other end of the power adapter
cable to the wall outlet.
Refer to the following illustration when connecting the Model FS308 switch.
Each of the preceding steps has a corresponding reference number in the
illustration.
Note: Ethernet specifications limit the cable length between your PC or
server and the switch to 328 feet (100 meters) in length.
Connect Devices to the Switch
Normal/Uplink
1
8
FDX
AUTO
Duplex Mode
8935FA
Normal/Uplink
1
8
FDX
AUTO
Duplex Mode
**
Normal/Uplink push button set to the Normal position for connection
to the server.
RJ-45
connector
1
2
3
4
*
*
For a typical configuration, set toggle switches to AUTO. For more
information, refer to "FDX/AUTO Duplex Toggle Switches."
**
100 Mbps
10 Mbps
Key
Содержание FS308 - Switch
Страница 1: ......
