NETGEAR FE104, Руководство по установке

Страница: 14 / 44

Installation Guide for the Model FE104 and Model FE108 Fast Ethernet Hubs
2-2 Physical Description
Key:
1 = Pwr (power) LED
2 = Col (collision) LED
3 = Utilization % LEDs
4 = RJ-45 ports with Link/Rx and Part (partition) LEDs on each port
5 = Normal/Uplink push button
Figure 2-2. Front panel of the Model FE108 Fast Ethernet Hub
LED Display
Three LEDs on the front panel of the hub and two on each port connector allow you to identify the
following information:
• Status of the hub power supply
• Collision occurrence on an Ethernet segment in a standalone hub or a stack of hubs
• Data utilization percentage of the Ethernet segment in a standalone hub or a stack of hubs
• Link and receive activity for all ports in the hub
• Partition status for all ports in the hub
185EA
Normal/Uplink
1 2 3 4
Link/Rx Part
5 6 6 8
Utilization %
Pwr Col 1 10 20 >30
100BASE-TX FAST ETHERNET HUB FE108
1
2
3
4
5
100 Mbps
F AST