Factory Default Settings
To reset the extender to factory default settings, you can use the Reset button on the
side panel or you can log in and click the onscreen RESET button. For more information,
see Return the Extender To Its Factory Default Settings on page 37.
The following table shows the factory default settings.
Table 2. Factory default settings
Default Settings
Feature
Enabled
Smart Setup
Enabled
WiFi communication
NETGEAR_EXT
WiFi network name (SSID)
Disabled
Security
Auto
1
Transmission speed
Varies by region
Country/region
802.11a/b/g/n/ac
Operating mode
54/145/300 Mbps
Data rate in the 2.4 GHz band
54/145/300/433/867 Mbps
Data rate in the 5 GHz band
Client enabled
DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual
data throughput rate.
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
User Manual
47
Factory Settings and Technical
Specifications
AC750 WiFi Range Extender
