9
Setup Wi-Fi
™
connections (optional)
By default, Wi-Fi™ is turned on and is secured using Wi-Fi™ Protected Access
with a Pre-Shared Key (WPA2-PSK).
Please take note of your Wi-Fi™ Network Name (SSID) and Network Key
(Password) printed on the sticker attached to the bottom of your Modem
Router, as these are necessary to connect to wireless devices.
To connect a Wi-Fi™ enabled device (such as your laptop, mobile phone,
tablet or gaming device) to the Internet, please ensure that the Wi-Fi™ on the
device is switched on. Then select your wireless network (this is your Wi-Fi™
Network Name [SSID]) and click ‘Connect’.
You will be required to enter your Network Key (Password) and ‘Connect’.
Please note the password is case sensitive.
Wait approximately 30 seconds for the connection to establish.
Repeat for each device. Your Netgear
®
N150 device can connect up to
4 devices simultaneously.
Your Wi-Fi™ devices should now be connected and you will be able to access
the Internet via Wi-Fi™.
Restore factory
settings
Serial number and
MAC address
Wi-Fi
™
network
name and password
WPS
security pin
