.El Design
eldesign.dk
NETGEAR DSL VVG2000
38/48
security problem. You shouldn't check this box unless you have a specific reason to do so.
To assign a computer or server to be a DMZ server:
1. Click the
Default DMZ Server
checkbox
2. Type the IP address for that server.
3. Click
Apply
.
Use Router As DHCP Server
The VVG2000 Router is set up by default as a DHCP (Dynamic Host Configuration Protocol)
Server, which provides the TCP/IP configuration for the all the computers that are connected to the
Router.
Unless told to change these settings by your ISP, leave the
Use Router As DHCP Server
check box
checked.
If your ISP has you clear this check box, you must have another DHCP server within your network
or else you must manually configure the computer.
•
Starting IP Address:
This box specifies the first of the contiguous addresses in the IP
address pool. 192.168.0.2 is the default start address.
•
Ending IP Address:
This box specifies the last of the contiguous addresses in the IP address
pool. 192.168.0.254 is the default ending address.
Address Reservation
When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same
IP address each time it accesses the DHCP server. Reserved IP addresses should be assigned to
servers that require permanent IP settings.
To Reserve An IP Address:
1. Click the
Add
button.
2. Check the Computer you wish to add to the
Address Reservation Table
at fisrt.
3. If the Computer is not on the
Address Reservation Table
; Enter the IP Address, MAC
Address, and Device Name of the computer you wish to add.
4. Click the
Add
button when finished.
To Edit A Reserved IP Address:
1. Select the radio button next to the reserved address you want to edit.
2. Click the
Edit
button.
3. Edit the IP Address, MAC Address or Device Name.
4. Click the
Accept
button when finished.
To Delete A Reserved IP Address:
1. Select the radio button next to the reserved address you want to delete.
2. Click the
Delete
button.
