5-13
v1.0, October 2008
Chapter 5
Troubleshooting
Troubleshooting Tips
Here are some tips for correcting simple problems that might occur when you are using the
NETGEAR Universal Remote.
Table 5-1. Connecting to the NETGEAR Universal Remote
Problem
Solution
LED does not blink
when you press a
button.
Replace battery with one new 3.3V 2032 lithium
battery.
LED blinks when
you press a button,
but device does not
respond.
Make sure that the remote is aimed at your
device and is not more than 15 feet away.
LED blinks one long
blink.
An entry error has occurred (for example, the
wrong button). Try the entry sequence again.
Remote does not
control devices, or
commands are not
working correctly.
Try all listed codes for the device. Make sure
that the device operates with an infrared remote
control.
CH+
,
CH-
, and
LAST
do not work
for your RCA TV.
Due to RCA design from 1983 to 1987, only the
original remote control will operate these
functions.
No volume on a
device.
See
Chapter 3, “Changing the Volume Lock
.
Channels do not
change properly.
If the original remote control required you to
press
Enter
to change channels, press
Enter
on
this remote after entering the channel number.
