NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router, Справочное руководство

Страница: 75 / 227

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual
Wireless Configuration 3-21
v1.0, May 2008
• SSID. The Service Set Identification (SSID) identifies the wireless local area network.
NETGEAR is the default DGFV338 SSID. However, you may customize it by using up to 32
alphanumeric characters. Write your customized SSID on the line below.
________________________________________________
Note: All wireless nodes in the same network must be configured with the same SSID:
• Wireless Security Type. Circle one:
– None
– WEP [Authentication: Auto or Open System or Shared Key]
– WPA [with PSK or RADIUS] [Encryption: TKIP or AES]
– WPA2 [with PSK or RADIUS]
– WPA and WPA2 [with PSK or RADIUS]
Note: If you selected any of the secure settings—Shared Key or above—the other devices in
the network will not connect unless they are set to same Security and Authentication type and
have the other required mandatory fields correctly enabled as described previously.
• WEP Encryption Keys. For all four 802.11b keys, choose the Key Size. Circle one: 64, 128,
or 152 bits
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
• WPA-PSK or WPA2-PSK (Pre-Shared Key)
Record the WPA-PSK or WPA2-PSK key. Key: ___________________________________
• WPA or WPA2 RADIUS Settings. For WPA or WPA2, record the following RADIUS
settings:
Server Name/IP Address: Primary _________________ Secondary __________________
Port: ___________________________________
Shared Key: ___________________________________