manualshive.com logo in svg

NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router, Справочное руководство, Страница: 169 / 227

Поделиться
Скачать
NETGEAR DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router Скачать руководство пользователя страница 169

DGFV338 ProSafe Wireless ADSL Modem VPN Firewall Router Reference Manual

Router and Network Management

6-11

v1.0, May 2008

Using the Command Line Interface

You can access the command line interface (CLI) using Telnet from the LAN or, if enabled in the 
Remote Management menu, from the WAN.

To access the CLI from a communications terminal when the ProSafe DGFV338 is still set to its 
factory defaults (or use your own settings if you have changed them), do the following:

1.

From your computer’s command line prompt, enter the following command:

telnet 192.168.1.1

2.

Enter 

admin

 and 

password

 when prompted for the login and password information (or enter 

guest

 and 

password

 to log in as a read-only guest).

3.

Enter 

exit

 to end the CLI session.

Any configuration changes made via the CLI are not preserved after a reboot or power cycle unless 
the user issues the CLI 

save

 command after making the changes.

Event Alerts

You can be alerted to important events such as WAN port auto-rollover, WAN traffic limits 
reached, and login failures and attacks.

Tip: 

If you are using a dynamic DNS service such as TZO, you can always identify 

the IP address of your DGFV338 by running 

tracert

 from the Windows Start 

menu Run option. For example, 

tracert your 

DGFV338.mynetgear.net

 and you will see the IP address your ISP 

assigned to the DGFV338.

Note: 

The command line interface is not supported at this time. Check with the 

NETGEAR Web site for the latest status.

Содержание DGFV338 - ProSafe Wireless ADSL Modem VPN Firewall Router




































































































































































































































Отзывы:

Нет отзывов