NETGEAR genie ADVANCED Home
41
D6300 WiFi DSL Modem Router
4.
Select
ADVANCED > Advanced - VPN > VPN Wizard
.
The VPN Wizard page displays.
5.
Click the
Next
button.
Enter the requested information:
•
Connection name
. Enter an appropriate name for the connection. This name is not
supplied to the remote VPN endpoint. Rather, it is used to help you manage the VPN
settings.
•
Pre-shared key
. The key has to be entered both here and on the remote VPN
gateway or the remote VPN client. This method does not require using a CA
(certificate authority).
•
VPN tunnel connection
. The wizard has to know if you are planning to connect to a
remote gateway or setting up the connection for a remote client or computer to
establish a secure connection to this device.
6.
Click the
Next
button.
The page that displays depends on which VPN tunnel you selected from the previous
page:
•
If you selected the
A remote VPN Gateway
radio button from the previous page, the
following page displays:
a.
Enter the remote IP address of the gateway you want to connect to, or provide
the Internet name of the gateway.
The Internet name is the fully qualified domain name, as set up in a Dynamic DNS
service.
b.
Click the
Next
button.
c.
Enter the remote LAN IP address and subnet mask of the remote gateway.
