14
|
Chapter 2: Advanced Configuration
CWGE111 802.11g WiFi Receiver User Manual
Radio Settings
Configure the Radio Settings
1.
Select the Radio mode.
It allows the user to choose between radio modulations support, (e.g., 802.11b/g, 802.11g
only, 802.11b, etc.). The available settings depend on the Wi-Fi module installed on the
device.
a.
802.11b/g
b.
802.11b only
c.
802.11g only
2.
Select the Country.
Select a country location where you are using the device. Available channels and output
power would be adjusted accordingly.
3.
Select the Channel Scanning Mode.
Choose from one of the channel options to scan. If Single is selected, the option
Scanned Channel
will be shown.
a.
Single
b.
Ch. 1, 6 & 11
c.
Full
4.
Select the Bit Rate (Mbps).
Use this option to fix the 802.11 transmit bit rate. Available options depend on the Radio
Mode chosen. If auto is chosen, the device will choose the best bit rate dynamically and
automatically.
a.
auto
b.
options from 1 to 54 Mbps
5.
Click
SAVE
at the bottom of the screen to apply the settings.
