Chapter 2: Advanced Configuration
|
13
CWGE111 802.11g WiFi Receiver User Manual
DHCP Server Settings
Enable the DHCP Server Settings
1.
Select the Enable radio button.
Configure and enable the built-in DHCP server. If enabled, the IP address range can be
configured.
2.
Set the parameters.
a.
Start IP Address
b.
Set the Stop IP Address
c.
Set the Subnet Mask
3.
Set the DHCP Reservations.
Configure DHCP Reservation
if there is a need to assign a
specific IP address to a
specific MAC address using
DHCP.
a.
Click the Config link and
set the options on the
DCHP Reservations
screen.
4.
Click
SAVE
at the bottom of
the screen to apply the
settings.
Disable the DHCP Server
1.
Select the Disable radio button.
2.
Click
SAVE
at the bottom of the screen to apply the settings.
