NETGEAR CG834WG Скачать руководство пользователя | Manualshive

Страница: 2 / 64

background image

ii

v1.0, October 2007

© 2007 by NETGEAR, Inc. All rights reserved.

Trademarks

NETGEAR is a trademark of NETGEAR, Inc. Microsoft, Windows, and Windows NT are registered trademarks of
Microsoft Corporation. Other brand and product names are registered trademarks or trademarks of their respective
holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to
make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit
layout(s) described herein.

FCC Warning Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

Safety Information

To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with
minimum distance of 20 cm between the radiator and your body. Use the supplied antenna.

Declaration of Conformity for R&TTE directive 1999/5/EC

Essential requirements – Article 3. Protection requirements for health and safety – Article 3.1a. Testing for electric
safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection

«
1
2
3
4
...
»

Содержание CG834WG

































































Отзывы:

Нет отзывов

Похожие инструкции для CG834WG

Бренд: USR IOT Страницы: 31

StormPort DSL Modem

Бренд: Paradyne Страницы: 2

Бренд: Versitron Страницы: 15

Бренд: TP-Link Страницы: 4

Бренд: ATO Страницы: 18

Бренд: Research Страницы: 20

Бренд: Multitech Страницы: 36

Бренд: Kathrein Страницы: 16

Бренд: Viva Страницы: 7

Бренд: MultiModem Страницы: 88

Бренд: German ElectroniX Страницы: 11

Бренд: USR IOT Страницы: 47

Бренд: Four-Faith Страницы: 34

Бренд: 3Com Страницы: 8

EtherLink 3C900B

Бренд: 3Com Страницы: 154

EZ Connect SMC8002CM

Бренд: SMC Networks Страницы: 34

Бренд: O2 Страницы: 8

Бренд: O2 Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды