NETGEAR 7200 Series Скачать руководство пользователя страница 246

Страница: 246 / 282

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4

10-28

Quality of Service (QoS) Commands

202-10102-01, May 2005

show diffserv service brief

This command displays all interfaces in the system to which a DiffServ policy has been attached.
The inbound direction parameter is optional.

Format

show diffserv service brief [in]

Mode

Privileged EXEC

DiffServ Mode

The current setting of the DiffServ administrative mode. An attached
policy is only active on an interface while DiffServ is in an enabled
mode.

The following information is repeated for interface and direction (only those
interfaces configured with an attached policy are shown):

Interface

Valid slot and port number separated by forward slashes.

Direction

The traffic direction of this interface service.

OperStatus

The current operational status of this DiffServ service interface.

Policy Name

The name of the policy attached to the interface in the indicated direc-
tion.

show policy-map interface

This command displays policy-oriented statistics information for the specified interface and
direction. The <slot/port

parameter specifies a valid interface for the system.

Note:

This command is only allowed while the DiffServ administrative mode is enabled.

Format

show policy-map interface

slot/port> [in]

Mode

Privileged EXEC

Interface

Valid slot and port number separated by forward slashes.

Direction

The traffic direction of this interface service.

Operational Status

The current operational status of this DiffServ service interface.

Policy Name

The name of the policy attached to the interface in the indicated direc-
tion.

The following information is repeated for each class instance within this pol-
icy: Class Name

The name of this class instance.

In Discarded Packets

A count of the packets discarded for this class instance for any reason
due to DiffServ treatment of the traffic class.

Содержание 7200 Series



























































































































































































































































































Результаты поиска

Содержание 7200 Series

Отзывы:

Похожие инструкции для 7200 Series

Бренды по названию

Популярные бренды

NETGEAR 7200 Series, Руководство пользователя

Результаты поиска

Содержание 7200 Series

Отзывы:

Похожие инструкции для 7200 Series

Бренды по названию

Популярные бренды