NETGEAR 7200 Series, Руководство пользователя

Страница: 136 / 282

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software Version 4
8-78 Switching Commands
202-10102-01, May 2005
Mode
Privileged EXEC
show loginsession
This command displays current telnet and serial port connections to the switch.
Format
show loginsession
Mode
Privileged EXEC
ID
Login Session ID
User Name
The name the user will use to login using the serial port or Telnet. A
new user may be added to the switch by entering a name in a blank
entry. The user name may be up to 8 characters, and is not case sensi-
tive. Two users are included as the factory default, ‘admin’ and ‘guest’.
Connection From
IP address of the telnet client machine or EIA-232 for the serial port
connection.
Idle Time
Time this session has been idle.
Session Time
Total time this session has been connected.
show users
This command displays the configured user names and their settings. This command is only
available for users with Read/Write privileges.
The SNMPv3 fields will only be displayed if SNMP is
available on the system.
Format
show users
Mode
Privileged EXEC
User Name
The name the user will use to login using the serial port, Telnet or Web.
A new user may be added to the switch by entering a name in a blank
entry. The user name may be up to eight characters, and is not case sen-
sitive. Two users are included as the factory default, ‘admin’ and ‘guest’
Access Mode
Shows whether the operator is able to change parameters on the switch
(Read/Write) or is only able to view them (Read Only). As a factory
default, the ‘admin’ user has Read/Write access and the ‘guest’ has
Read Only access. There can only be one Read/Write user and up to five
Read Only users.
SNMPv3 Access Mode
This field displays the SNMPv3 Access Mode. If the value is set to
ReadWrite,
the SNMPv3 user will be able to set and retrieve parame-