Netgate SG-3100 Скачать руководство пользователя страница 38

Страница: 38 / 65

Security Gateway Manual

SG-3100

Note:

The SG-3100 does not support NVMe drives.

The SG-3100 has two slots capable of installing M.2 SATA drives,

J10

and

J11

J10

The

J10

connector is for a

2280

(22mm x 80mm) M.2 SATA

only

The 80mm standoff cannot be moved.

J11

The

J11

connector is for a

2242

(22mm x 42mm) M.2 SATA drive,

it can be used for a cellular card in

conjunction with a microSIM card.

The 42mm standoff is also permanent and cannot be moved.

Note:

For more information on Cellular Configuration in pfSense

Plus software, please visit the

pfSense Documen-

tation page

This installation example uses the

J11

M.2 SATA slot with a

2242

M.2 SATA Drive. The procedures to install a

2280

M.2 SATA Drive in the

J10

slot is similar.

1. Turn the system over carefully to avoid scratching the top of the system. Remove the four (4)

T10 Torx

screws

as indicated below.

2. Turn system upright and carefully remove the cover. Set the cover off to the side and keep it upright so the top

is not scratched. Identify where the M.2 SATA drive slot is located and remove the screw from the standoff.

3. After the screw has been removed, insert the M.2 SATA drive into the slot at about a 30° angle.

Содержание SG-3100























































Результаты поиска

Содержание SG-3100

Отзывы:

Похожие инструкции для SG-3100

Бренды по названию

Популярные бренды

Netgate SG-3100, Руководство пользователя

Результаты поиска

Содержание SG-3100

Отзывы:

Похожие инструкции для SG-3100

Бренды по названию

Популярные бренды