CHAPTER
THIRTEEN
FACTORY RESET PROCEDURE
This procedure performs a factory reset using the hardware button on the Netgate 2100.
See also:
•
•
Factory Reset from GUI or Console
1. Remove power from the device.
2. Gently use a paper clip or similar tool to depress the reset button.
3. While keeping the button depressed, apply power to the device.
4. Keep the button depressed for about
30 seconds
until the device boots far enough to check the button state.
All three LEDs will rapidly flash red once the reset process starts.
5. Wait for the device to reboot after the reset procedure completes.
When the device boots again, it will be at its factory default settings and accessible from the LAN at
https://192.
168.1.1
.
If this procedure fails,
and perform a factory reset there.
64
Содержание SG-2100
Страница 1: ...Security Gateway Manual SG 2100 Copyright 2022 Rubicon Communications LLC Jul 22 2022...
Страница 39: ...Security Gateway Manual SG 2100 Copyright 2022 Rubicon Communications LLC 37...
Страница 40: ...Security Gateway Manual SG 2100 Copyright 2022 Rubicon Communications LLC 38...
Страница 45: ...Security Gateway Manual SG 2100 Fig 4 The M 2 SATA Drive Installed Copyright 2022 Rubicon Communications LLC 43...