User’s Manual
Wireless Serial Server GW5120
Copyright © 2009 Neteon Technologies, Inc.
All rights reserved.
50
A.3.5 Configure Virtual COM Ports
Serial/IP COM port can be changed as follows:
Select a COM port on the list.
Enter IP address of GW5120 on
IP Address of Server
Enter TCP Port number of GW5120 on
Port Number
On
Server Credentials
, the default is
No Login Required
. If the GW5120 does require login
by the Virtual COM Redirector, the Virtual COM Redirector must provide a username and/or
password every time an application tries to access the GW5120.
Click the
Configuration Wizard,
and
Start
button that shall appear on the wizard window. This
step verifies that the Virtual COM Redirector communicates with the GW5120. If
Log
show no
errors, click
Use Settings
, return to the Control Panel
Settings on the
Connection Protocol
must match the TCP/IP protocol supported by the
GW5120. The Configuration Wizard is capable of determining the correct settings.
On
COM Port Options
, the settings must match the COM port behavior expected by the PC
application. The Configuration Wizard will recommend such settings.
Fig 72. Configuration Wizard from Serial to IP tool
