DIGIMANO 1000
Netech Corporation
110 Toledo St, Farmingdale, NY 11735,
To obtain a RMA number follow the linkMaintenance and Storage
Calibration / Service
The mechanical assembly of DigiMano 1000 contains no parts that can be serviced by
the user. The unit should be returned to Netech Corporation for repair or calibration.
The alignment and adjustment parameters are critical to the robust and efficient
performance of the unit and can be performed only at the factory. The unit is factory
calibrated with NIST traceable standards and recommended to be calibrated once a
year.
Netech maintains a complete repair and recalibration service at a very low cost and fast
turnaround. Estimates for repair and recalibration are available upon request.
DigiMano 1000 contains
NO USER SERVICEABLE PARTS
and calibration/ service
should be performed only by Netech.
Attempt to repair / service the unit outside
Netech voids the warranty.
Returning the DigiMano for Re-Calibration
Products returned to Netech for repair or recalibration requires a RMA (Return
Authorization Number) for speedy processing of the service required.
required information, EmailCanada), International 631-531-0100.
When shipping units to the factory enclose a copy of the RMA and the number should
be on used as the reference in the shipping label.
The shipment should be addressed to:-
Attn: Service Department
Netech Corporation
110 Toledo St.
Farmingdale , New York 11735.The shipment should be addressed to:-