| W
ireless
M2M
12
3. Forwarding the required ports to the camera
Each model of camera uses a range of virtual network ports to send and receive data.
Due to the nature of connecting through a router with network address translation, it is
necessary to inform the router of the camera’s ports so that all features work.
a)
In the same browser tab you used to access the camera, navigate to the camera’s
new IP address e.g.
http://192.168.1.101.
Log in again using the same credentials
as before.
b)
From the menu on the left side of the screen, select the
Network
menu then select
the
Port Mapping
item. The port mapping page is displayed.
c)
If you wish to use the default ports, make a note of these port numbers so that you
can forward them on the router in the next step. Otherwise, enter the ports you wish
to use for the camera and click the
Apply
button.
d)
In the same browser tab you used to access the 4G WiFi M2M Router, log in to the
NetComm Wireless router again as you did in step 1.b).
e)
Select
Networking -> Routing -> Port forwarding
