Configuring NP731 in WDS mode
3 of 18
© NetComm Wireless 2017
Configuring NP731s for WDS mode
WDS mode
One NP731 connects to an existing router via Ethernet and provides a wireless signal for wireless devices. All other NP731
devices repeat the wireless signals of your existing network to provide coverage to a greater area of your premises. The
NP731 can connect with up to eight (8) other NP731 devices to create a wireless mesh network.
Example used in this Guide
In this guide, we will first configure the NP731 device connected as an access point (AP) to the Router, and then we will
configure the other four NP731 devices on the WDS system.
In the example used in this guide, the m
ain router’s network address is
: 192.168.20.0 mask 255.255.255.0
Settings not mentioned
If settings are not specifically mentioned in this document, it is assumed that the factory default settings will be used.
