14 of 18
Technical Support Guide
© NetComm Wireless 2017
Notes on Checking a MAC Address
The MAC address for each NP731 device (regardless of whether they are the Access Point or Repeaters) can be checked using
the following procedure.
1
Connect the NP731 device to the router using an ethernet cable.
2
Power on the NP731 device
3
Open a browser and type in the NP731 device
’
s URL.
4
Click the Status tab and select the Overview tabbed page.
5
The MAC Address appears in the Radio Status section of the System Overview page:
6
Make a note of the MAC Address
7
Repeat the process for each repeater device and the AP device.
Enter MAC Address
You enter the MAC Addresses at the following points in the WDS setup process:
Enter each repeater device
’
s MAC Address when you configure the WDS Profile for each of the repeater devices for
Access Point, see section
WDS Link settings for Access Point
, above, and
Enter the AP
’
s MAC Address when you configure the WDS Profile for the AP Device on each of the Repeater Devices,
see section
Configure AP WDS Link settings
, above.
